% Example file for IZS 2008
%
% derived from bare_conf.tex, V1.3, 2007/01/11, by Michael Shell
% for use with IEEEtran.cls version 1.7 or later
%
% Support sites for IEEEtran.cls:
% http://www.michaelshell.org/tex/ieeetran/
% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/


%\documentclass[letterpaper,conference]{IEEEtran}
\documentclass[a4paper,conference]{IEEEtran}

% Paper size: use the paper size (a4 or US Letter) for which 
% your LaTeX installation and printer are known to work. 
% The choice of the paper size will not affect the typesetting; 
% only the page margins will be different. 

% depending on your installation, you may wish to adjust the top margin:
%\addtolength{\topmargin}{1in}
\addtolength{\topmargin}{9mm}


% Add packages as you please:
%
\usepackage{ifthen}
\usepackage[cmex10]{amsmath} % Use the [cmex10] option 
   % to ensure compliance with IEEE Xplore (see bare_conf.tex)

% Some useful packages (and compatibility issues with the IEEE format)
% are pointed out in the file Some_LaTeX_Packages.txt, which is 
% taken verbatim out of bare_conf.tex by Michael Shell

% ------------------------------------------------------------

% *** Do not adjust lengths that control margins, column widths, etc. ***
% *** Do not use packages that alter fonts (such as pslatex).         ***

% ------------------------------------------------------------

% correct bad hyphenation here
\hyphenation{op-tical net-works semi-conduc-tor}

% ------------------------------------------------------------

\begin{document}
\title{Instructions for the Preparation of Papers\\ for the Proceedings of IZS 2008}

\author{%
\IEEEauthorblockN{Hans-Andrea Loeliger}
\IEEEauthorblockA{ETH Z\"urich\\
              ISI (D-ITET), ETH Zentrum\\
              CH-8092 Z\"urich, Switzerland\\
              Email: loeliger@isi.ee.ethz.ch}
}

% Several authors with up to three affiliations:

%\author{%
%\IEEEauthorblockN{Helmut B\"olcskei}
%\IEEEauthorblockA{ETH Z\"urich\\
%              IKT (D-ITET), ETH Zentrum\\
%              CH-8092 Z\"urich, Switzerland\\
%              Email: boelcskei@nari.ee.ethz.ch}
%\and
%\IEEEauthorblockN{Amos Lapidoth\\
%              and Hans-Andrea Loeliger}
%\IEEEauthorblockA{ETH Z\"urich\\
%              ISI (D-ITET), ETH Zentrum\\
%              CH-8092 Z\"urich, Switzerland\\
%              Email: \{lapidoth, loeliger\}@isi.ee.ethz.ch}
%}


% More authors / affiliations:

%\author{\IEEEauthorblockN{Helmut B\"olcskei\IEEEauthorrefmark{1},
%Amos Lapidoth\IEEEauthorrefmark{2},
%Hans-Andrea Loeliger\IEEEauthorrefmark{2},
%and Donald Duck\IEEEauthorrefmark{3}}
%\IEEEauthorblockA{\IEEEauthorrefmark{1}
%              ETH Z\"urich, 
%              IKT (D-ITET), ETH Zentrum, 
%              CH-8092 Z\"urich, Switzerland\\
%              Email: boelcskei@nari.ee.ethz.ch}
%\IEEEauthorblockA{\IEEEauthorrefmark{2}
%              ETH Z\"urich, 
%              ISI (D-ITET), ETH Zentrum, 
%              CH-8092 Z\"urich, Switzerland\\
%              Email: \{lapidoth, loeliger\}@isi.ee.ethz.ch}
%\IEEEauthorblockA{\IEEEauthorrefmark{3}
%              Duckburg}
%}



\maketitle


\begin{abstract}
Instructions are given for the preparation and submission of 
the papers accepted for IZS 2008. 
\end{abstract}



\section{Introduction}

Authors of accepted papers will be asked to produce a final manuscript 
not exceeding 4 pages that will be published in the Proceedings. 
Only electronic submissions in form of an IEEE Xplore-compatible PDF file 
will be accepted. 


\section{Preparation of the Paper}

Most authors will prepare their papers with \LaTeX\  
\cite{Laport:LaTeX}, \cite{KaDa:LaTeX}, \cite{GMS:LaTeXComp}, 
\cite{GRM:LaTeXGraph}. 
You may download the \LaTeX\ style file, a sample LaTeX file (this file), 
and the corresponding PDF file from the IZS 2008 web site (see below). 

Users of other text processing systems should attempt to duplicate the 
style of this example, in particular the sizes and type of font, as 
closely as possible. 
The allowed typing area is 182~mm (7.15~in) by 235~mm (9.25~in). 
The left margin should be 14~mm for A4 (210~mm $\times$ 297~mm) paper 
and 0.68~in for US~Letter (8.5~in $\times$ 11~in) paper. 
The top margin should be 30~mm for A4 paper and 0.75~in for US~Letter paper. 
(However, as the top margins of electronic papers are notoriously difficult to control, 
we are prepared to correct the vertical margins.) 

The use of Microsoft Word is not encouraged. However, acceptable formatting 
may be achieved by using the template 
available from the IZS web site. 

The style of references, equations, figures, tables, etc.,
should be the same as for the 
\emph{IEEE Transactions on Communications}. 
Pages should not be numbered. 
The affiliation shown for authors should constitute a
sufficient mailing address for persons who wish to write 
for more details about the paper.



\section{How to Submit}

The submitted PDF files must comply with the standards of IEEE Xplore. 
Further information on this, and on how to submit the final PDF file, 
may be found at the IZS 2008 web site:
\begin{center}
\tt http://www.izs2008.ethz.ch.
\end{center}
\vspace{2ex}


\section{IEEE Copyright Form}

For each paper, a completed and duly signed 
\emph{IEEE Copyright Form} must also be submitted. 
This form can be found at 
%\begin{center}
{\tt http://www.ieee.org/copyright/}
%\end{center}
or (partly filled for IZS 2008) 
at the IZS 2008 web site. 
The completed form should be sent by mail or by fax to 
\begin{center}
\begin{tabular}{ll}
\multicolumn{2}{l}{Mrs.\ B.\ Roeoesli}\\
\multicolumn{2}{l}{ISI (ETF E102) / ETH Zentrum}\\
\multicolumn{2}{l}{CH-8092 Zurich, Switzerland}\\
Phone: & + 41 44 632 2764 \\
Fax:   & + 41 44 632 1208 \\
\end{tabular}
\end{center}
Please make sure that the paper number is clearly indicated on the Copyright Form. 



\section{Deadline}

The deadline for submitting both the final (Xplore-compatible) 
manuscript and the completed IEEE Copyright Form is 
\begin{center}
\textbf{Thursday, January 10, 2008.}
\end{center}
Manuscripts received after this date or received without Copyright Form 
will not appear in the \emph{Proceedings of IZS 2008}. 



% \section{Conclusion}



\section*{Acknowledgment}

We are indebted to Michael Shell for maintaining and improving {\tt IEEEtran.cls}.



\begin{thebibliography}{9}

\bibitem{Laport:LaTeX}
L.~Lamport,
\emph{\LaTeX: A Document Preparation System,} 2nd~ed. 
Addison-Wesley, 1994. 

\bibitem{KaDa:LaTeX}
H.~Kopka and P.~W. Daly, 
\emph{A Guide to \LaTeX}, 3rd~ed.
Addison-Wesley, 1999.

\bibitem{GMS:LaTeXComp}
M.~Goossens, F.~Mittelbach, and A.~Samarin,
\emph{The \LaTeX\ Companion.}
Addison-Wesley, 1993.

\bibitem{GRM:LaTeXGraph}
M.~Goossens, S.~Rahtz, F.~Mittelbach,
\emph{The \LaTeX\ Graphics Companion.}
Addison-Wesley, 1997.

\end{thebibliography}

% trigger a \newpage just before the given reference
% number - used to balance the columns on the last page
% adjust value as needed - may need to be readjusted if
% the document is modified later
%\IEEEtriggeratref{8}
% The "triggered" command can be changed if desired:
%\IEEEtriggercmd{\enlargethispage{-5in}}

\end{document}
